Commission Implementing Regulation (EU) 2016/799
of 18 March 2016
implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components
ANNEX I C
Requirements for construction, testing, installation, and inspection
Appendix 3
PICTOGRAMS
PIC_001The tachograph may optionally use the following pictograms and pictogram combinations (or pictograms and combination similar enough to be unambiguously identifiable with these):
1.
BASIC PICTOGRAMS
| People | Actions | Modes of operation | |
|---|---|---|---|
  |
Company | Company mode | |
  |
Controller | Control | Control mode |
  |
Driver | Driving | Operational mode |
  |
Workshop/test station | Inspection/calibration | Calibration mode |
  |
Manufacturer |
| Activities | Duration | |
|---|---|---|
  |
Available | Current availability period |
 |
Driving | Continuous driving time |
  |
Rest | Current rest period |
  |
Other Work | Current work period |
  |
Break | Cumulative break time |
  |
Unknown |
| Equipment | Functions | |
|---|---|---|
  |
Driver slot | |
  |
Co-driver slot | |
  |
Card | |
  |
Clock | |
  |
Display | Displaying |
  |
External storage | Downloading |
  |
Power supply | |
  |
Printer/printout | Printing |
  |
Sensor | |
  |
Tyre size | |
  |
Vehicle/vehicle unit | |
  |
GNSS facility | |
  |
Remote Detection facility | |
  |
ITS interface |
| Specific conditions | |
|---|---|
  |
Out of scope |
  |
Ferry/train crossing |
| Miscellaneous | |||
|---|---|---|---|
  |
Events |   |
Faults |
  |
Start of daily work period |   |
End of daily work period |
  |
Location | ||
  |
Manual entry of driver activities | ||
  |
Security | ||
  |
Speed | ||
 |
Time | ||
  |
Total/summary |
| Qualifiers | |
|---|---|
| 24h | Daily |
  |
Weekly |
  |
Two weeks |
  |
From or to |
2.
PICTOGRAM COMBINATIONS
| Miscellaneous | |||
|---|---|---|---|
  |
Control place | ||
  |
Location start of daily work period |   |
Location end of daily work period |
  |
Position after 3 hours accumulated driving time | ||
  |
From time |   |
To time |
  |
From vehicle | ||
  |
Out of scope begin |   |
Out of scope end |
| Cards | |
|---|---|
  |
Driver card |
  |
Company card |
  |
Control card |
  |
Workshop card |
  |
No card |
| Driving | |
|---|---|
  |
Crew driving |
  |
Driving time for one week |
  |
Driving time for two weeks |
| Printouts | |
|---|---|
  |
Driver activities from card daily printout |
  |
Driver activities from VU daily printout |
  |
Events and faults from card printout |
  |
Events and faults from VU printout |
  |
Technical data printout |
  |
Over speeding printout |
| Events | |
|---|---|
  |
Insertion of a non valid card |
  |
Card conflict |
  |
Time overlap |
  |
Driving without an appropriate card |
  |
Card insertion while driving |
  |
Last card session not correctly closed |
  |
Over speeding |
  |
Power supply interruption |
  |
Motion data error |
  |
Vehicle motion conflict |
  |
Security breach |
  |
Time conflict or time adjustment (by workshop) |
  |
Over speeding control |
  |
Absence of position information from GNSS receiver or Communication error with the external GNSS facility |
 v |
Communication error with the remote communication facility |
| Faults | |
|---|---|
  |
Card fault (driver slot) |
  |
Card fault (co-driver slot) |
  |
Display fault |
  |
Downloading fault |
  |
Printer fault |
  |
Sensor fault |
  |
VU internal fault |
  |
GNSS fault |
  |
Remote Detection fault |
| Manual entries procedure | |
|---|---|
  |
Still same daily work period ? |
  |
End of previous work period ? |
  |
Confirm or enter location of end of work period |
  |
Enter start time |
 |
Enter location of start of work period. |
Note: Additional pictogram combinations to form printout blocks or record identifiers are defined in Appendix 4.